Glass Shelving Suppliers
Wall Shelving Glass Shelving Wooden Shelving Industrial Steel Shelving
Home
Glass Shelving Kits
Shelf Fixing Information
Contact Direct Shelving

Glass Shelving Information

Glass Shelving Kits

The kits comprise wall uprights and glass shelving brackets.

Please note: At this time, glass shelves are not included in the kits.

You Need To Provide

Glass Shelves

These should be no more than ???? cm long, by ??? cm deep. The shelves should be of toughened glass. This is available from a local glazier.

Fixings

The wall uprights are held to the wall with No. 10 x 2 1/4" countersunk screws. Depending upon the wall type, you may also require either plastic plugs or stud partition fixings.

Please note, however, that any wall mounted shelving is only as strong as the wall it is fixed to. Heavier items should always be placed upon lower shelves.

Fixing to the Wall

Before drilling any holes into a wall, ensure there are no hidden electrical cables or plumbing in the wall. Suitable detectors are available from DIY stores.

Carefully mark out the positions of the required holes. Make sure that the ends with three screw slots next to each other are upwards.

Using a ?? drill bit, drill holes into the wall. Screw the uprights onto the wall.

Place the brackets in the required positions on the wall uprights. Lay the shelves upon the brackets.

Also Available

Whatever your particular choice of wall mounted shelving, Direct Shelving would be pleased to supply the shelf brackets and uprights. Please do not hesitate to contact us!